SimCom SIM5300E

SIM5300E AT Command Manual V1.02
135
<ci> String type (string should be included in quotation marks); two bytes
cell ID in hexadecimal format
Reference
6.2.11 AT+CGSMS Select Service for MO SMS Messages
AT+CGSMS Select Service for MO SMS Messages
Test Command
AT+CGSMS=?
Response
+CGSMS: (list of currently available <service>s
OK
Read Command
AT+CGSMS?
Response
+CGSMS: <service>
OK
Write Command
AT+CGSMS=<service>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <service>
A numeric parameter which indicates the service or service
preference to be used
0 Packet Domain
1 Circuit switched
2
Packet Domain preferred (use circuit switched if GPRS not
available)
3 Circuit switched preferred (use Packet Domain if circuit
switched not available)
Reference
6.2.12 AT+CGEQMIN 3G Quality of Service Profile
AT+CGEQMIN 3G Quality of Service Profile (Minimum Acceptable)
Test Command
AT+CGQMIN=?
+CGEQMIN: <PDP_type>, (list_of supported <Traffic_class>s) ,(list of
supported <Maximum_bitrate_UL>s) , (list of supported
<Maximum_bitrate_DL>s), (list o
f supported <Guaranteed_bitrate_UL>s),
(list of supported <Guaranteed_bitrate_DL>s) ,(list of supported
<Delivery_order>s) ,(list of supported <Maximum_SDU_size>s) ,(list of
SIMCOM CONFIDENTIAL FILE