SimCom SIM5300E

SIM5300E AT Command Manual V1.02
136
supported <SDU_error_ratio>s) , (list of
supported<Residual_bit_error_ratio>s) ,(l
ist of supported
<Delivery_of_erroneous_SDUs>s) , (list of supported
<Transfer_delay>s) ,(list of supported <Traffic_handling_priority>s) [,(list of
supported <Source_statistics_descriptor>s) ,(list of supported
<Signalling_indication>s)]
[<CR><LF> +CGEQMI
N: <PDP_type>, (list of supported <Traffic_class>s) ,(list
of supported<Maximum_bitrate_UL>s), (list of supported
<Maximum_bitrate_DL>s) ,(list of supported <Guaranteed_bitrate_UL>s),
(list of supported <Guaranteed_bitrate_DL>s) ,(list of supported
<Delive
ry_order>s) ,(list of supported <Maximum_SDU_size>s) ,(list of
supported <SDU_error_ratio>s),(list of supported
<Residual_bit_error_ratio>s) ,(list of supported
<Delivery_of_erroneous_SDUs>s) ,(list of supported
<Transfer_delay>s) ,(list of supported<Traff
ic_handling_priority>s) [,(list of
supported <Source_statistics_descriptor>s) ,(list of
supported<Signalling_indication>s)] [...]]
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+CGQMIN?
Response
+CGEQMIN: <cid>, <Traffic_class
> ,<Maximum_bitrate_UL>,
<Maximum_bitrate_DL> ,<Guaranteed_bitrate_UL> ,<Guaranteed_bitrate_
DL>, <Delivery_order> ,<Maximum_SDU_size> ,
<SDU_error_ratio> ,<Residual_bit_error_ratio> ,<Delivery_of_erroneous_S
DUs> ,<Transfer_delay> ,<Traffic_handling_priority>
[,<Source_statistics_descriptor>,<Signalling_indication>]
[<CR><LF> +CGEQMIN: <cid>,
<Traffic_class> ,<Maximum_bitrate_UL> ,<Maximum_bitrate_DL>,
<Guaranteed_bitrate_UL> ,<Guaranteed_bitrate_DL>,
<Delivery_order> ,<Maximum_SDU_size> ,<SDU_error_ratio> ,<Residual_bi
t_error_ratio> ,<Delivery_of_erroneous_SDUs> ,<Transfer_delay>,<Traffic_
handling_priority>
[,<Source_statistics_descriptor> ,<Signalling_indication>][...]]
If error is related to ME functionality:
+CME ERROR: <err>
SIMCOM CONFIDENTIAL FILE