SimCom SIM5300E

SIM5300E AT Command Manual V1.02
162
+RECEIVE,<n>,<data length>:
Reference
7.2.17 AT+CIPATS Set Auto Sending Timer
AT+CIPATS Set Auto Sending Timer
Test Command
AT+CIPATS=?
Response
+CIPATS: (list of supported <mode>s),(list of supported <time>)
OK
Read Command
AT+CIPATS?
Response
+CIPATS: <mode>,<time>
OK
Write Command
AT+CIPATS=<mode>[,<time>]
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <mode> A numer
ic parameter which indicates whether set timer when
module is sending data
0 Not set timer when module is sending data
1 Set timer when module is sending data
<time>
1..100 A numeric parameter which indicates the seconds after which
the data will be sent
Reference
7.2.18 AT+CIPSPRT Set Prompt of ‘>’ When Module Sends Data
AT+CIPSPRT Set Prompt of ‘>’ When Module Sends Data
Test Command
AT+CIPSPRT=?
Response
+CIPSPRT: (list of supported <send prompt>s)
OK
Read Command
AT+CIPSPRT?
Response
+CIPSPRT: <send prompt>
SIMCOM CONFIDENTIAL FILE