SIM5300E AT Command Manual V1.02
1 Report a list
of current calls of ME automatically when the
current call status changes.
<idx>
1..7 Call identification number
This number can be used in +CHLD command operations
<dir>
0 Mobile originated (MO) call
1 Mobile terminated (MT) call
<stat> State of the call:
0 Active
1 Held
2 Dialing (MO call)
3 Alerting (MO call)
4 Incoming (MT call)
5 Waiting (MT call)
6 Disconnect
<mode> Bearer/tele service:
0 Voice
1 Data
2 Fax
<mpty>
0 Call is not one of multiparty (conference) call parties
1 Call is one of multiparty (conference) call parties
<number> String type
(string should be included in quotation marks)
phone number in format specified by <type>
<type> Type of address
<alphaId> String type
(string should be included in quotation marks)
alphanumeric representation of <number> corresponding to the entry found
in phone book.
Reference
3GPP TS 27.007 [13][14]
3.2.17 AT+CLCK Facility Lock
AT+CLCK Facility Lock
To Next Page
Loading...
