SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
43
<subaddr> String type (string should be included in quotation marks) sub
address of format specified by <satype>
<satype> Type of sub address octet in integer format (refer GSM 04.08 [8]
sub clause 10.5.4.8)
<alphaId> String type
(string should be included in quotation marks)
alphanumeric representation of <number> corresponding to the entry found
in phone book.
Reference
3GPP TS 27.007
3.2.22 AT+COPS Operator Selection
AT+COPS Operator Selection
Test Command
AT+COPS=?
Response
TA returns a list of quadruplets, each representing an operator present in the
network. Any of
the formats may be unavailable and should then be an
empty field. The list of operators shall be in order: home network, networks
referenced in SIM, and other networks.
+COPS: (list of supported<stat>,long alphanumeric<oper>,short
alphanumeric <oper>,numeric <oper>)s[,,(list of supported <mode>s), (list
of supported <format>s)]
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+COPS?
Response
TA returns the current mode and the currently selected operator. If no
operator is selected, <format> and <oper> are omitted.
+COPS: <mode>[,<format>,[<oper>,[<AcT>]]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English