SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
42
Test Command
AT+COLP=?
Response
+COLP: (list of supported <n>s)
OK
Read Command
AT+COLP?
Response
+COLP: <n>,<m>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+COLP=<n>
Response
TA enables or disables the presentation of the COL (Connected Line) at the TE
for a mobile originated call. It has no effect on the execution of the
supplementary service COLR in the network.
Intermediate result code is returned from TA to TE before any +CR or V.25ter
responses.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Intermediate result code
When enabled (and called subscriber allows), an intermediate result code is
returned before any +CR or V.25ter responses:
+COLP: <number>,<type>[,<subaddr>,<satype> ,<alphaId>]
Parameters <n> (parameter sets/shows the result code presentation status in the TA):
0 Disable +COLP notification
1 Enable +COLP notification
<m> (parameter shows the subscriber COLP service status in the network):
0 COLP not provisioned
1 COLP provisioned
2 Unknown (e.g. no network, etc.)
<number> String type
(string should be included in quotation marks)
phone number of format specified by <type>
<type> Type of address octet in integer format;
129 Unknown type
161 National number type
145 International number type
177 Network specific number
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English