SimCom SIM5300E

SIM5300E AT Command Manual V1.02
176
8. AT Commands for PING Application
8.1 Overview
Command Description
AT+CIPPING PING Request
AT+CIPCTL Set the Mode When Receiving an IP Packet
AT+CIPFLT SET THE RULES OF IP FILTER
8.2 Detailed Descriptions of Commands
8.2.1 AT+CIPPING PING Request
AT+CIPPING PING Request
Test Command
AT+CIPPING=?
Response
+CIPPING: (list of supported <retryNum>s),(list of supported <dataLen>s),(list of
supported <timeout>s),(list of supported <ttl>s)
OK
If error is related to ME functionality:
+CME ERROR: <err>
Read Command
AT+CIPPING?
Response
+CIPPING: <retryNum>,<dataLen>,<timeout>,<ttl>
OK
If error is related to ME functionality:
+CME ERROR: <err>
Write Command
AT+CIPPING=<IPaddr>[,<retr
yNum>[,<dataLen>[,<timeo
ut>[,<ttl>]]]]
Response
+CIPPING: <replyId>,<Ip Address>,<replyTime>,<ttl>[<CR><LF>
+CIPPING: <replyId>,<Ip Address>,<replyTime>,<ttl>
[...]]
OK
SIMCOM CONFIDENTIAL FILE