SIM5300E AT Command Manual V1.02
Reference
Note:
If the file type is text, the character set of the output text is Unicode
little endian without the header “FF FE”.
13.2.18 AT+CMMSRDPUSH Read the information of the MMS Push
message
AT+CMMSRDPUSH Read the information of the MMS PUSH message
Test Command
AT+CMMSRDPUSH=?
Response
+CMMSRDPUSH: (range of <index>)
OK
Write Command
AT+CMMSRDPUSH=<index>
Response
+CMMSRDPUSH:
<n>
,”<sender>”,”<subject>”,”<transaction>”,”<location>”,”<time>”,<class>,<
size>
OK
or
+CMMSRDPUSH: 6, “<receiver>”,”<time>”,<status>
OK
or
+CMMSRDPUSH: 255
OK
or
+CME ERROR: <err>
To Next Page
Loading...
