SIM5300E AT Command Manual V1.02
T
PDU in hexadecimal format: ME/TA converts each octet of TP data unit into
two IRA character long hexadecimal number (e.g. octet with integer value 42
is presented to TE as two characters 2A (IRA 50 and 65)).In the case of CBS:
GSM 03.41 TPDU in hexadecimal format.
<index> Index of message in selected storage <mem2>
Reference
3GPP TS 27.005
4.2.7 AT+CMSS Send SMS Message from Storage
AT+CMSS Send SMS Message from Storage
Test Command
AT+CMSS=?
Response
OK
Write Command
AT+CMSS=<index>[,<da>,<toda
>]
Response
TA sends message with location value <index> from message storage
<mem2> to the network (SMS-
SUBMIT). If new recipient address <da> is
given, it shall be used instead of the one stored with the message. Reference
value <mr> is returned to the TE on suc
cessful message delivery. Values can
be used to identify message upon unsolicited delivery status report result
code.
1) If text mode(+CMGF=1) and sending successful:
+CMSS: <mr>
OK
2) If PDU mode(+CMGF=0) and sending successful:
+CMSS: <mr>
OK
3)If error is related to ME functionality:
+CMS ERROR: <err>
Parameters
<index> Integer type; value in the range of location numbers supported by
the associated memory
<da> GSM 03.40 TP-Destination-Address Address-
format(string should be included in quotation marks); BCD numbers (or GSM
default alphabet characters) are converted to characters of the currently
selected TE character set (specified by +CSCS in 3GPP TS 27.007); type of
address given by <toda>
To Next Page
Loading...
