SimCom SIM5300E User Manual

SIM5300E AT Command Manual V1.02
63
AT+CUSD=<n>[,<str>[,<dcs>]] OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameters <n>
A numeric parameter which indicates control of the unstructured
supplementary service data
0 disable the result code presentation in the TE
1 enable the result code presentation in the TE
2 cancel session (not applicable to read Command response)
<str>
String type (string should be included in quotation marks)
USSD-string
<dcs> Cell Broadcast Data Coding Scheme in integer format
(default 0)
Reference
GSM 03.38 [25]
Note:
When ussd is not support or return error ,TE will print +CUSD:4.
3.2.46 AT+CSSN Supplementary Services Notification
AT+CSSN Supplementary Services Notification
Test Command
AT+CSSN=?
Response
returns values supported as a compound value.
+CSSN: (list of supported <n>s),(list of supported <m>s)
OK
Read Command
AT+CSSN?
Response
gives corresponding setting value of <n> and <m>.
+CSSN: <n>,<m>
OK
Write Command
AT+CSSN=<n>[,<m>]
Response
enables/disables the presentation of notification result codes from TA to TE.
Command Syntax: AT+CSSN = [<n>[,<m>]]
URC Response Syntax:
+CSSI : <code1>[,<index>]
+CSSU: <code2>[<index> [,<number>,<type>]]
OK
If error is related to ME functionality:
+CME ERROR: <err>
SIMCOM CONFIDENTIAL FILE

SimCom SIM5300E Specifications

General

Brand	SimCom
Model	SIM5300E
Category	Control Unit
Language	English