SimCom SIM5300E

SIM5300E AT Command Manual V1.02
148
Test Command
AT+CIPSTART=?
Response
1) If AT+CIPMUX=0
+CIPSTART: (list of supported <mode>),(<IP address>),(<port>)
+CIPSTART: (list of supported <mode>),(<domain name>),(<port>)
OK
2) If AT+CIPMUX=1
+CIPSTART: (list of supported
<n>),(list of supported <mode>),(<IP
address>),(<port>)
+CIPSTART: (list of supported <n>),(list of supported <mode>),(<domain
name>),(<port>)
OK
SIMCOM CONFIDENTIAL FILE