System
Dial Number Plan
4-14 Strata CIX Programming Vol.1 12/09
22 Outgoing Call Talking
Disconnect Timer
If PGM 103 field 40 is set to enable, after this timer expires the out-going call
is cut off.
23 Network DSS Refresh
Timer
Select Network DSS Refresh Timer. The time interval when all network DSS
settings are refreshed system-wide.
Note DSS button LEDs change state immediately when the status of the
DSS button changes - regardless of this timer value.
Possible values:20~180 seconds (default = 30)
24 Outgoing Number
Display Timer
This timer sets how long dialed numbers will display on telephone LCDs for
outgoing line calls.
Possible values: 1~120 seconds (default = 10)
25 Page Auto
Disconnect Timer
Automatically disconnects the station from a Page call if the station does not
hang-up when this timer expires (1~240 seconds in one second intervals).
Default=10 seconds
The station must be enabled for this feature in Prog 103-44 for this timer to
apply to the Page call.
26 Caller ID Display
Timer
This timer determines how long Caller ID information displays on telephone
LCDs after a call is answered (1~300 seconds in one second intervals).
Default=15 second
F
IELD DESCRIPTION
To Next Page
Loading...