Strata CIX 100 - Called Number Table

To Next Page

To Previous Page

Trunks

ISDN

6-42 Strata CIX Programming Vol.1 12/09

322 Called Number Table

Prerequisite Program: 306 page 6-5

When calls are sent to the PSTN with Calling Number Identification Service (CNIS), the CIX can supply

special CNIS information as part of the Setup Message. This program may be used for sending a unique

number based on the source directing the call to the Strata CIX PRI.

IELD DESCRIPTION

OLG Number OLG Number.

Possible values:1~32 CTX/CIX/100, 1~50 CTX/CIX 670 BCTU only or BBCU only,

1~50 CIX200, 1~128 CTX/CIX670 BCTU + BEXU or BBCU +

BECU, 1~50 CIX1200 HCTU only, 1~128 CIX1200 HCTU +

HEXAU, 1~220 CIX1200 HCTU + HEXBU

(default = 0)

01 Source Type Specify the type of circuit used for outgoing calls: 1- PDN; 2- GCO; 3- Pooled Line.

Possible values:Primary DN (0~99999), Group CO (1~128) or Pool Line Group

(1~128); (default = no value)

02 Source Number Specify the number of the source type selected: PDN 0~9999

GCO or Pooled Line Possible Values: 0~32 (CIX100), 0~50 (CIX200, CIX670/

CIX1200 Basic), 0~128 (CIX670 Exp, CIX1200 Exp A), 0~220 (CIX1200 Exp B)

(default = 0)

03 Special Number

Assignments

Specify the number to be sent when calling out from the source (max. seven digits).

This number is appended to Program 321 field 02

Possible values:Up to 7 digits (default = no value)

Note Destination type and destination must be entered before a DID number can

be assigned.