Station
Assignment
Strata CIX Programming Vol.1 12/09 5-33
Station
502 Paging Group
502 Terminal Paging Group Assignment
Prerequisite Program:
200 page 5-1
Assigns Primary DNs to Paging Group(s).
1. Select Station > Paging Group.
2. Enter a DN in the Primary DN field or select an existing record by clicking one of the following buttons:
• List – select from a summary list of programmed DKTs on the right side of the screen.
• Copy – Enter a DN in the Primary DN field and click Copy. Enter a new DN(s) to assign existing
Paging Group settings.
• Get Default - Sets all data to factory defaults.
3. Select the desired values. See descriptions below.
4. Click Submit.
F
IELD DESCRIPTION
00 Primary DN Enter the Prime DN of the station to be assigned to paging groups. A station may
belong to more than one paging group.
Note You can have up to 72 stations in a paging group in the CIX100 and up to 120
stations in a paging group in the CIX200, CIX670 & CIX1200.
Page Group capacity:
• CIX100, CIX40 & CTX28, 4 Page Groups
• CIX670 Basic & CIX200, 8 Page Groups
• CIX670 Expanded, 16 Page Groups
• CIX1200 Basic, 8 Page Groups (HCTU only)
• CIX1200 Expanded, 24 Page Groups (HEXAU or HEXBU)
Possible values: Up to 5 ASCII characters (default = no value))
01~16 Page Group
(CIX40, 100,
670)
19-26 for PG17~24
(CIX1200 only)
Check to assign the DN to this paging group.
Page Group capacity:
• CIX100, CIX40 & CTX28, 4 Page Groups
• CIX670 Basic & CIX200, 8 Page Groups
• CIX670 Expanded, 16 Page Groups
• CIX1200 Basic, 8 Page Groups (HCTU only)
• CIX1200 Expanded, 24 Page Groups (HEXAU or HEXBU)
Note Note: You can have up to 72 stations in a paging group in the Strata
CIX100 and up to 120 stations in a paging group in the Strata CIX 200/
670/1200.
Possible values: On or Off (default).
To Next Page
Loading...