Strata CIX Programming Vol.1 12/09 5-1
Station
Station 5
This chapter provides Strata CIX station programming information.
Assignment
Program Number(s): 200, 201, 203, 204, 214, 205, 213, 215, 208, 210, 216, 260, and 502
The following programs assign station data.
200 Station Data
Prerequisite Program: 100 page 4-1
This command assigns stations to the system.
1. Select Station > Station Assignments.
2. Click on the Basic tab.
3. To modify an existing station enter its DN number in the Primary DN field or select a DN from the list on
the right side of the screen.
4. To create a new DN with custom settings click Create. A dialog box will appear.
• Select PRG 200: DKT/SLT/IPT_B/SL_VMU if you are creating a Digital Key Telephone, Single Line
Telephone or IPT-1020SD
• Select PRG 260: IPT_L/SIP/IP_VA/IP_ATT/IP_VM if you are creating an IPT2000-, IP5000-series or
a SIP telephone.
• Enter the desired values.
• Click Submit.
5. Delete – Enter a Primary DN or a range of Primary DNs to delete and click OK.
6. Change DN – Enter a DN in the Primary DN field and click Change DN. Enter the new DN assignment
and click OK.
• Setup the DN by adding values to the remaining fields.
• Get Default sets all values to factory default.
• Click Submit.
The following table takes you through the parameters for IP station assignment (PRG 260).
To Next Page
Loading...