Station
Assignment
Strata CIX Programming Vol.1 12/09 5-29
Station
209 Hunt Group
Prerequisite Program: 200 page 5-1
This command assigns Station Hunting Group data.
1. Select > Station > Hunt Group.
2. Click on the Group tab.
3. Enter a Group Number for an existing record or click one of the following buttons:
• List - View list of programmed hunt groups.
• Create – Assign a new hunt group with custom settings.
• Get Default - Sets all data to factory defaults.
4. Click Submit.
F
IELD DESCRIPTION
Hunt Group Number Hunt Group Number
Possible values:1~90 (CTX28, CIX40 CTX100), 1~200 (CTX670 Basic & CIX200),
1~640 (CTX670 Exp) 1~200 (CTX1200 Basic HCTU only), 1~1100
(CTX670 Exp HEXAU or HEXBU)
(default = no value)
01 Hunt Method Select Hunt Method
Possible values:Distributed (for voice mail and UCD hunt groups - MAS Voice Mail
Ports connected to a GIPx, MIPU, LIPU or LIPS interface that should
be set as IP Voice Mail, or Circular (for Multiple DN hunt groups)
(default)
02 Pilot Number Enter Pilot Directory Number. This is the number that is dialed to call the hunt group.
Possible values:Up to 5 ASCII characters (default = no value) any type of hunt group
can have a pilot number.
Note Any type of hunt group can have a pilot number. Distributed hunt groups
must have a pilot number. Voice mail hunt groups should be distributed with a
Pilot Number. Multiple DN hunt groups should be circular with no Pilot
Number.
04 Number to Display Enter the number that is displayed when called by, or when calling any member of the
hunt group.
Possible values:Up to 5 ASCII characters (default = no value)
Note This number should be the DH Group Pilot number for Voice Mail hunt
groups. This number could be the PDN of a Multiple DN hunt group, in which
case the number would override the number assigned in Program 200, field
15 for PDNs and Program 206, field 04 for Phantom DNs.
05 Pilot No. SCFwd Allows you to assign a system call forward pattern to the Pilot Number of a hunt
group.
Possible values:0~4 (CIX/CTX100 & CTX28 & CIX40), 0~10 (CIX/CTX670 & CIX200
Basic), 0~32 (CIX/CTX670 Exp), 0~10 (CIX200 Basic HCTU only),
0~48 (CIX1200 Exp. HEXAU or HEXBU)
(default = 0)
To Next Page
Loading...