Strata CIX 100 - Chapter 6 -Trunks; Outgoing Line Groups

Trunks
Strata CIX Programming Vol.1 12/09 6-5
Trunks
306, 307 Outgoing Line Groups
Prerequisite Program: None
OLG is a line selection feature which enables the use of external trunk or private line groups for outgoing
service. Assign and configure up to 128 OLGs (the same line can be placed in an OLG and an ILG).
1. Select > Trunk > OLG.
2. Enter an OLG number in the Group Number field for an existing record or click one of the following
buttons:
• List – choose a summary list of programmed OLGs on the right side of the screen.
• Create – Assign a new OLG with default settings.
• Copy – Enter an OLG in the Group Number field and click Copy to make a new OLG assignment
with settings copied from the OLG entered in Group Number.
• Delete – Delete an OLG.
• Get Default - restores all data to factory defaults.
3. Enter Program 306 data.
4. Enter Program 531. See “DR Overview” on page 9-6 for details.
5. Enter Program 514. See “514 SMDR for OLG Assignment” on page 9-45 for details.
6. Click Submit.
F
IELD DESCRIPTION
Group Number Enter the OLG Group number.
Possible values:1~6 CTX28, 1~32 CIX40, 1~32 CTX/CIX/100, 1~50 CTX/CIX 670
BCTU only or BBCU only, 1~128 CTX/CIX670 BCTU + BEXU or
BBCU + BECU, 1~50 CIX1200 HCTU only, 1~128 CTX670 HCTU
+ HEXAU, 1~220 CTX670 HCTU + HEXBU
(default = no value)
01 Group Type Select the OLG Type.
Possible values:Analog (default), ISDN, SIP
02 Trunk Type Select the Trunk Type.
Possible values:CO (default) or Tie
03 Service Type Service Type.
Possible values:Standard (default) or StrataNet
04 GCO Key1 Number Select the first GCO Key Group number.
Possible values:1~6 CTX28, 1~32 CIX40, 1~32 CTX/CIX/100, 1~50 CTX/CIX 670
BCTU only or BBCU only, 1~128 CTX/CIX670 BCTU + BEXU or
BBCU + BECU, 1~50 CIX1200 HCTU only, 1~128 CIX1200 HCTU
+ HEXAU, 1~220 CIX1200 HCTU + HEXBU
(default = no value)