Services
Mapping
Strata CIX Programming Vol.1 12/09 9-37
Services
Mapping
System Availability: Not available with CTX28
Program Number(s): 657, 658, 659 and 660
The following programs map network and primary COS, DRL, FRL and QPL settings to each other.
1. Select > Strata Net > Mapping.
2. Enter Program 657 data.
3. Enter Program 658 data.
4. Enter Program 659 data.
5. Enter Program 660 data.
6. Get Default - sets all data to factory defaults.
7. Click Submit.
657 Network COS Mapping Table
System Availability: Not available with CTX28
Prerequisite Program: None
This table maps a network COS received as part of a Traveling Class Mark to a local Class of Service for
access to local services. There is no translation of outgoing network COS.
F
IELD DESCRIPTION
Ntwk COS Enter the network COS to be mapped.
Possible values:1~32 (default = no value)
Local COS Enter the Local COS to be used in place of the received network COS.
Possible values:1~32 (default = no value)
02 Off-hook Call
Announce
Choose whether an incoming call with this network COS can activate OCA.
Possible values:Enable or Disable (default)
03 System Speed Dial Choose whether an incoming call with this network COS can use a system
speed dial number to make an outgoing call.
Possible values:Enable or Disable (default)
04 COS Override Choose whether an incoming call with this network COS can use Class of
Service Override.
Possible values:Enable or Disable (default)
05 TGAC Override Choose whether an incoming call with this network COS can override local
trunk group access control. Typically an attendant function.
Possible values:Enable or Disable (default)
To Next Page