Trunks
Strata CIX Programming Vol.1 12/09 6-7
Trunks
300, 301 Trunk Assignment
Prerequisite Program: 100 page 4-1
Assigns an analog or T1 trunk (line) and its parameters to the system. Click on each tab to navigate
through the programs. The trunks assigned to the equipment display on the left of the screen. The first
column displays the trunks used and the second column displays the equipment. You can also sort based
on trunks and equipment.
Important! You must have Internet Explorer (IE) 6, or higher, on your PC for the sort to work correctly.
1. Select > Trunk > Trunk Assignments.
2. Enter a Trunk Number or click one of the following buttons:
• List –choose from the summary list of programmed trunks on the right side of the screen.
• Create – Assign a new trunk with default settings.
• Copy – Enter a Trunk Number and click Copy to make a new trunk assignment with settings copied
from the OLG entered in Group Number.
• Delete – Delete a trunk.
• Get Default - restores all data to factory defaults.
3. Enter Trunk Assignment Data.
4. Click Submit.
5. Click the Go Timer/DIT link to view Programs 308 and 310 (see “308 Trunk Timer” on page 6-12 for
details).
Note When assigning CAMA trunks for E911 (R2.22 MH232 and later, or M3.10 MK024 and later
systems) set Release Supervision and Answer Supervision to Enabled.
F
IELD DESCRIPTION
Line Number Enter the Line Number.
Possible values:1-6 CTX28, 1-31 CIX40, 1~64 CTX/CIX/100, 1~96 CTX/CIX 670
BCTU only or BBCU only, 1~264 CTX/CIX670 BCTU + BEXU or
BBCU + BECU, 1~96 CIX1200 HCTU only, 1~264 CIX1200
HCTU + HEXAU, 1~440 CIX1200 HCTU + HEXBU
(default = no value)
To Next Page
Loading...