Operation
System Setup
10-8 Strata CIX Programming Vol.1 12/09
Remote Program Update
Important! Before beginning the Remote Update process:
• The SM/SD card must be formatted and installed in the system.
• Backup the existing database (***.dat) BEFORE starting the Remote Update process.
• Activation of the new software requires a clear-reboot operation that will drop all existing calls and will
take the system out of service from 10 minutes to an hour or more, depending on the system size.
1. Download the correct file for your system from the Toshiba FYI site:
- CIXYYYR5.20MT0xx file (current)
- CIXYYYR3.10MK0xx
(YYY=CIX system type; xx=version number)
2. DO NOT UNCOMPRESS the zip file. Copy the zip file to a folder on your PC.
3. In Network eManager, select Maintenance > CIX Software Update.
The first screen presents the option of backing up the CIX data before beginning the update process. If
you click Yes, the database backup screen displays allowing you to selet the database to backup. Once
the backup procedure has been completed, click the Browse to find the corresponding CIX software
update for each CIX system to be updated (the udpate software must match the corresponding system
or the update procedure will fail).
4. Click on Step 2 - Upload file(s) to eManager server. The update software is copied to a designated
folder in the Network eManager server
5. When all the CIX software updates have been uploaded, press the Start button to complete the update
process.
CIX Software Identification
Refer to the table below to identify CIX software release and builds in software file names or when verifying
CIX software versions. For example, if the software ID is ML029, this means ML0 is equal to CIX Release
4.0 and nn is the software build number 29.
Remote Update for Release 4
The remote program update is administered in the same manner as previous releases. In previous
releases however, the remote update transferred approximately 200 small files. In R4 the remote update is
done with one large file, the same file used for local update.
CIX Release Software ID
R3.0 = MJ0nn
R3.1 = MK0nn
R4.0 = ML0nn
R4.1 = MN0nn
R4.2 = MP0nn
R5.0 = MR0nn
R5.1 = MS0nn
R5.2 = MT0nn
nn = Software build level/number
To Next Page
Loading...