Strata CIX 100 - Voice Mail Port Data

To Next Page

To Previous Page

Services

Strata CIX Programming Vol.1 12/09 9-5

Services

580 Voice Mail Port Data

Prerequisite Program: None

Assign characteristics of individual voice mail ports.

1. Select System > Voice Mail Port Data.

2. Enter a VM Port DN or click one of the following buttons:

- List – view a summary list of programmed VM Port DNs.

- Copy – Enter an VM Port DN value in the field with the same name. Click Copy to make a new VM

Port DN assignment with settings copied from the port entered in VM Port DN.

3. Enter Program 580 data.

4. Get Default - sets all values to factory defaults.

5. Click Submit.

IELD DESCRIPTION

00 VM Port DN Enter the DN of an individual VM port. For direct transfer to voice mail

enter the remote Node ID and Pilot DN.

Possible values:Up to 5 digits (default = no value)

01 Control Method Specify In-band or SMDI integration. Select SMDI for remote voice mail.

Possible values:Inband or SMDI (default = no value)

02 Send A/D Tone Select whether Strata CIX sends A or D tone when a station connecting to

voice mail answers or disconnects respectively.

Possible values:Enable or Disable (default = no value)

03 Send B Tone Enable Strata CIX to send B tones in the event of a Blind Transfer Recall.

Possible values:B Tone, No Tone or B Tone and Extension Number

(default = no value)

04 End-to-end Enable Strata CIX to send DTMF tones to voice mail in response to key

presses from a digital telephone.

Possible values:Enable or Disable (default = no value)

07 VM to VM Call

Blocking

Set to blocking to prevent Voice Mail Auto Attendant, supervised

transferred, calls from forwarding back into Voice Mail.

Possible values:Blocking or Non-blocking (default)