Strata CIX 100 - Dr Override by System Speed Dial

Services
Account Codes
Strata CIX Programming Vol.1 12/09 9-31
Services
509 DR Override by System Speed Dial
Prerequisite Program: 105 System Data
This command assigns the service class components that are used by Destination Restriction Override By
Speed Dial. DR Override must first be enabled in Program 105, System Data.
1. Select > LCR/DR > DR Override by System Speed Dial.
2. Select the COS, DRL, FRL and QPL override values.
3. Get Default - sets all data to factory defaults.
4. Click Submit.
F
IELD DESCRIPTION
01 Override COS Select the override COS value.
Possible values:1~32 (default =1)
02 Override DRL Select the override DRL value.
Possible values:1~16 (default =1)
03 Override FRL Select the override FRL value.
Possible values:1~16 (default =1)
04 Override QPL Select the override QPL value.
Possible values:1~16 (default =1)