Strata CIX 100 - Multiple Call Group Members Assignment

Station
Assignment
Strata CIX Programming Vol.1 12/09 5-39
Station
518 Multiple Call Group Members Assignment
Prerequisite Program: 517
Use this program to assign members to a group.
1. Select > Station > Multiple Call Group.
2. Click the Member tab.
3. Select the Index Number, then enter the Member DN.
Important! Immediate Destinations can only be PDNs (Digital and/or Standard Telephones) and
PhDNs.
Delay Destinations can be PDNs of Standard Telephone circuits only and Voice Mail
Hunt Group Pilot Numbers (not Multiple DN Hunt Groups).
Note Each group can have up to 25 members. You can have up to 64 groups.
Note The buttons on this screen are dynamic. When you select an empty index number the Add button
displays. When you select an existing index number the Modify and Remove buttons display.
Modify enables you to edit, while Remove deletes the multiple ringing group index number.
F
IELD DESCRIPTION
Multiple Call Group Number Multiple Call Group Number
CIX100, enter 1~16. CIX200, CIX670 Basic enter 1~32.
CIX670 Exp enter 1~64, CIX1200 Basic, enter 1~32, CIX1200 Exp enter 1~96
03 Member DN Select an index to a add a new member to this MC Group; or select an existing
Member DN to Modify or Delete the member.
To add a Member DN, enter a PDN, PhDN, or Hunt Group Pilot number that
exists in the system, then select which ringing option should be assigned to the
member (Member DNs can be in multiple MC Groups).
Possible values:Up to 32 digits (default = No Data)
04 Ringing Options Select: Immediate, Delay 1 or Delay 2 ring.
Note
• Immediate ring assignments will continue to ring when Delay 1 & 2 ring
assignments ring.
• Delay 1 ring assignments will continue to ring when Delay 2 ring
assignments ring.
• Delay ring PDN and PhDN buttons will flash red and not ring immediately
after the MC Group is called; they will ring and flash green when their delay
ring timers expire.