Strata CIX 100 - Sip Trunk Assignment

Trunks
Trunk DID/DNIS Setup Wizard
Strata CIX Programming Vol.1 12/09
6-49
Trunks
326 SIP Trunk Assignment
Prerequisite Program: 100; 304; 309; 306
This command assigns SIP trunks.
1. Select IP-Telephony > SIP Trunking - Channel Group Setting tab.
2. Setup the SIP Channel Group by adding values to the remaining fields.
3. List - View a list of the programmed SIP Trunk Channel Groups.
4. Get Default - restores data to factory defaults.
5. Click Submit.
F
IELD DESCRIPTION
00 SIP Trunk Channel
Group
Enter a channel group number.
Possible values:1~32 (CIX40), 1~32 (CTX100), 1~48 (CTX670 Basic &
CIX200), 1~128 (CTX670 Exp), 1~ 48 (CIX1200 HCTU only),
1~128 (CIX1200 HCTU+HEXAU), 1~220 (CIX1200 HCTU
+HEXBU)
01 Equipment Assign the Equipment Number of the LIPU/LIPS MIPU and/or GIPx card.
CIX40 GIPx/MIPU card in R1 CHSU40A Cabinet is 01/Slot 06 (0106).
CIX40 GIPx/MIPU card in R2 CHSU40A2 Cabinet is 01/Slot 05 (0105).
Cabinet numbers:
• CTX100: Select 01 for Base and Expansion cabinet.
• CTX670: Select 01 for Base and 02 ~ 07 respectively for each
Expansion cabinet.
• CIX200: Select 01 for Base and 02 for Expansion cabinet.
• CIX1200: Select 01 for Base and 02 ~ 12 respectively for each
Expansion cabinet.
Slot numbers:
• CIX100: Select 01 or 03 for Base slots and 05 or 07 for Expansion
slots
• CIX200: Select 01 ~ 04 for either cabinet.
• CIX670: Select 01, 03, 05 and 07 for Base slots and 01, 03 and 05
for Expansion slots.
• CIX1200: Select 01, 03, 05 and 07 for Base slots and 01, 03 and
05 for Expansion slots.
02 LAN Interface Number There is only one LAN interface on an MIPU/GIPU.
Possible values:1
03SIP Trunk Channels Enter the number of GIPU, MIPU, LIPU or LIPS channels to be assigned as
SIP trunk resources
Possible values:(GIPU) 1 ~ 8, (MIPU16, LIPU, LIPS) 1 ~ 16, (MIPU24) 1 ~ 32
04 RBT on Incoming Call Enable ringback tone to be returned to the caller.
Possible values:Enable (Default) or Disable