Strata CIX 100 - Identify Program Sequences

Strata CIX Programming Guidelines
Use Default Auto-programming to Start Up
1-14 Strata CIX Programming Vol.1 12/09
Identify Program Sequences
Use the following tables to quickly identify the programs needed to fulfill your setup requirements. See the
Index to correlate program numbers and their functions.
Station Setup
Use the following table to quickly access the programs needed to set up station requirements.
Trunk Setup – Analog
Use the following table to quickly access the programs needed to set up analog trunk requirements.
Station
Type
Assignment Run Programs in Sequence from left to right
SLT DN 100 200
IP PDN 100 150 260
DKT
DP
PDN 100 200 204 208 205
PhDN 205 206
DADM 204 213
DDSS 214 215
Attd 100 200 204 208
Ext 100 200 208
VM 100 200 204 206 209 218 579 580
ISDN Ext 100 202 217
Pilot DN 540
Station Hunting 209 218
Call Pickup Groups 210
Emergency Ringdown 216
Paging Groups 502
Station Speed Dial 516
Trunk Type Assignment Run Programs in Sequence from left to right
LS/GS
Basic 100 304 306 300
Ring 310
Timer 308
DISA 310
Tie line
Basic 100 304 306 300
Timer 308
DISA 310