Strata CIX 100 - Intercept Treatment

Trunks
Service
Strata CIX Programming Vol.1 12/09
6-23
Trunks
319 Intercept Treatment
Prerequisite Program: None
This command assigns Intercept positions for Strata CIX Day/Night schedules. Intercept positions are used
when the destination of a trunk line call is not determined
with DID or DIT.
Get Default - restores data to factory defaults.
Copy -Use this button to copy the entries to another tenant.
F
IELD DESCRIPTION
Tenant Number Select the Tenant number for which the Intercept Destinations should
be assigned.
Possible values:1~8.
01 Day1 Destination
Type
02 Day2 Destination
Type
03 Night Destination
Type
Select Destination Type for each.
Possible values:None (default), Dialing Digits, or Night Bell
Day1 Destination
Day2 Destination
Night Destination
Enter Destination for each.
Possible values:Up to 32 ASCII characters (default = no value)
• To intercept with a DN use 0~99999
• To intercept with a Network DN use 1~32
• To intercept with Dial Digits Paging 1~16