Strata CIX 100 - CIX100: Base, Exp.01; CIX200: Base 01, Exp.02; CIX670: Base 01, Exp 02~07. CIX1200: Base 01, Exp 02~12; GVMU - 28, GVPH - 40 R1 HW, Gipx, MIPU or GCOCIH - 40 R2 HW

Station
Assignment
Strata CIX Programming Vol.1 12/09 5-19
Station
214 DSS Console Assignment
Prerequisite Program: 200 page 5-1
This assignment allows up to eight Direct Station Selection (DSS) Consoles to be assigned to a station.
The assignment is referenced to the stations’s Primary DN.
1. Select > Station > Station Assignments.
2. Click on the DSS tab.
3. Enter a DN number in the Primary DN field or click the list on the right side of the screen
4. Enter the Equipment number in which the DSS(s) is installed.
5. Get Default will set all data to the factory defaults.
6. Click Submit.
F
IELD DESCRIPTION
Prime DN Enter the PDN of the station that is to be associated with the DSS console(s).
Possible values:Any string up to 5 digits (default = no value).
01~08 DSS Equipment No.
1~8
Enter the DSS equipment number.
Cabinet numbers:
• CIX100: Base, Exp.01
• CIX200: Base 01, Exp.02
• CIX670: Base 01, Exp 02~07.
• CIX1200: Base 01, Exp 02~12
Slot numbers:
• CIX100: Base 01, Exp.05~08
• CIX100: ACTU Relay Equipment = Cab 02, Slot 05.
• CIX100: ASTU Equipment=010901 and 010902
• CIX200: Base/Exp. 01~04
• CIX200: LSLU Equipment=010401 and 010402.
• CIX670/1200: Base 01~08
• CIX670/1200: Exp. 01~10
CTX28 and CIX40 assignments below are hard coded and cannot be
changed.
01, 01 - 8 digital telephones on motherboard - 28, 40 R1HW and R2HW
01, 05 – GVMU - 28, GVPH - 40 R1HW, GIPx, MIPU or GCOCIH - 40 R2HW
01, 06 – GIPx, MIPU16 or GCOCIH - 40 R1HW, no card - 28, 40 R2HW
01, 07 - 8 digital telephones on GCDU - 28, 40 R1HW and R2HW
Example: If the DSS console should be connected to a BDKU in cabinet 5,
slot 2, circuit 3; enter 050203.
Note If a PDN is assigned to the DSS equipment number, it must be
deleted using PRG201 before attempting to assign the DSS console.