Operation
License Control
10-14 Strata CIX Programming Vol.1 12/09
License Control
The following programs enable you to issue and maintain License Activation settings for Strata Network
eManager users.
Prerequisite Program: None
This program enables you to issue new licenses.
1. Select Maintenance > Licensing > License Control.
2. Issue a License by cutting and pasting or manually entering the 60-character string in the License Code
text box.
Note If you are not adding the License Code to Network eManager immediately, copy and save the
code in Notepad -using Fixedsys font - onto a disk.
3. Click one of the following buttons:
• Issue – to issue the License Code.
• Cancel Issue – to cancel the License Code issue.
4. Activate the License entered above by selecting the delay timer.
5. Click one of the following buttons:
• Activate – for license activation.
• Cancel Activate – to cancel license activation.
Note Cancel Issue (step 3) and Cancel Activate buttons work only in Standby mode.
License Issue
Prerequisite Program: None
This program enables System Administrators to issue Licenses for Network eManager users.
F
IELD DESCRIPTION
Status Status applies to both License issue and License Activate. Displays Licensing
Status.
Possible values:Not yet, Issue Stand by, Issue Finished, Cancel Issue, Activate
Stand by, Activate Finished or Cancel Activate
License Code Cut and paste the License Code text string or manually enter the License Code
(four characters per box).
Possible values:60 characters.
Note The License Code will have to be generated from Toshiba’s FYI website
(http://fyi.tsd.toshiba.com). After obtaining the License code from FYI
save it as a Text file. Cut and paste the License code obtained from
Toshiba’s FYI website. The License Code is made up of the MAC
Address and the number of ports. The License Code that is generated
for a particular MAC Address is only good for the processor that
contains that MAC Address.
To Next Page