Strata CIX Programming Vol.1 12/09 10-1
Operation
Operation 10
This chapter discusses Strata eManager operational programming functions.
System Setup
Program Number(s): 900, 901 and 915
These programs enable programmers to initialize Strata CIX, check software versions and set the region
(for built-in parameters not changeable by jumper or switch - unique for each region and affect system
operation).
1. Select Maintenance > Hardware Info. and Control - CIX Processor.
2. Click Restart to reset Strata CIX or click Initialize CIX to delete programmed data and revert to default
settings.
3. 901 CIX Version data is for viewing only.
4. Get Default - sets all data to factory defaults.
5. Click Submit.
To Next Page