Strata CIX 100 - Bsis Rs-232 Serial Port Setup

System
Miscellaneous System Commands
Strata CIX Programming Vol.1 12/09 4-41
System
804 BSIS RS-232 Serial Port Setup
Prerequisite Program: None
Use this screen to setup the RS-232 serial ports on the BSIS PCB.
1. Select > System > I/O Device.
2. Click the RS232 Serial Port tab.
3. Enter Program 804 data.
4. Get Default sets all values to factory default.
5. Click Submit.
F
IELD DESCRIPTION
00 BSIS Port (1~4) Enter the BSIS PCB port number.
Possible values:1~4 (default = no value)
01 Port Speed Select the data speed for the BSIS port in bits per second (bps).
Possible values:300, 1200, 2400, 4800, 9600 (default), 19200, 38400 or 57600
Note The total combined maximum speed of BSIS ports cannot exceed
57,600 bps.
02 Port Parity Select the parity error checking method used by the BSIS port.
Possible values:None, Even or Odd (default)
03 Data Bits Select Data Length.
Possible values:7 Bits (default) or 8 Bits
04 Flow Control This setting indicates the type of flow control used between the BSIS port and
the SMDI or SMDR device. To enable the CIX to buffer call records set this field
to Flow.
Possible values:None (default) or Flow
05 Wait Timer Select the maximum time to wait for connection. The Timer value can be one
through 255 seconds. Select
0 to set to permanent waiting.
Possible values:0~255 (default = 30)