Strata CIX 100 - Smdr for System Assignment

Services
Miscellaneous
Strata CIX Programming Vol.1 12/09 9-43
Services
Miscellaneous
The Strata CIX system can monitor SMDR, Call History and Behind Centrex. Use the following programs
to set up these services.
SMDR
The following enables programming for SMDR, Call History and Behind Connection settings.
Program Number(s): 512, 513 and 514
The following programs assigns system-wide SMDR parameters.
1. Select System > SMDR.
2. Enter Program 512 data.
3. Enter Program 513 data.
4. Enter Program 514 data.
5. Get Default - sets all data to factory defaults.
6. Click Submit.
512 SMDR for System Assignment
Prerequisite Program: None
Assigns system-wide SMDR parameters.
F
IELD DESCRIPTION
01 Caller ID Field Include Caller ID records in SMDR.
Possible values: Enable or Disable (default)
02 Record for
Abandoned Call
Generate B Record for an abandoned call.
Possible values:Enable or Disable (default)
03 Record ANI Include ANI in SMDR record.
Possible values:Enable (default) or Disable
04 Record Authorization
Code
Include authorization codes in SMDR records.
Possible values:Enable or Disable (default)
05 End-of-Record CR Include a Carriage Return (CR) at the end of an SMDR record.
Possible values:Enable (default) or Disable
06 Abandoned Call Ring
Time
Enable - to output an SMDR call record of the ringing time of abandoned
calls.
Disable - to not output an SMDR call record of the ringing time of abandoned
calls.
Possible values: Enable or Disable (default)