System
PAD Values
Strata CIX Programming Vol.1 12/09 4-29
System
PAD Table
Program Number(s): 107, 108 and 114
Assign PAD groups, PAD tables and PAD conference tables using these programs.
1. Select System > PAD Table.
2. Enter Program 107 data.
3. Enter Program 108 data.
4. Enter Program 114 data.
5. Click Submit.
107 PAD Table Assignment
Prerequisite Program: None
Assigns additional Sender and Receiver PAD values to PAD groups in the PAD table.
F
IELD DESCRIPTION
01 Sender PAD Device
Number
Enter Sender PAD device or group. See Table 4-2 or use drop-down menu.
Possible values:Analog telephone, DKT, Analog trunk, T1 trunk, ISDN
station, ISDN trunk, CONF bridge, Music source, EXT.
paging, IPT-B, IPT-L/SIP, MIPU/GIPU_IPT2000/IP5000,
MIPU/GIPU-Strata Net, SIP Trunk, PAD group 1~17.
(default = no value.)
CIX100 - 6 PAD group numbers
CIX200/670/1200 Basic - 10 PAD group numbers
CIX670, CIX1200 Expanded - 32 PAD group numbers
02 Receiver PAD
Device Number
Enter Receiver PAD device or group number. See Table 4-2 or use drop-
down menu.
Possible values:Same as above
CIX100 - 6 PAD group numbers
CIX200/670/1200 Basic - 10 PAD group numbers
CIX670, CIX1200 Expanded - 32 PAD group numbers)
03 PAD Loss Enter PAD Value (see Table 4-2 or use the drop-down menu). The value
shown represents the net effect.
Note
To PAD is to insert loss; therefore, “negative loss” equals net gain.
Possible values:1 = 6 dB Net Gain
2 = 3dB Net Gain
3 = 0dB
4 = 3dB Net Loss
5 = 6dB Net Loss
6 = 9dB Net Loss
7 = 12dB Net Loss
8 = 15dB Net Loss
(default = no value)
To Next Page
Loading...