Strata CIX 100 - Emergency Ringdown Assignment

To Next Page

To Previous Page

Station

Assignment

5-26 Strata CIX Programming Vol.1 12/09

216 Emergency Ringdown Assignment

Program Number(s): 216

Prerequisite Program:

200 page 5-1

Assigns Emergency Ring Down parameters to Primary DNs.

1. Select > Station > Station Assignments.

2. Click on the RingDown tab.

3. Enter a DN number in the Primary DN field or select an existing record by clicking one of the following

buttons:

• List – select from the list on the right side of the screen.

• Copy – Enter a DN in the Primary DN field and click Copy. Enter a new DN to assign existing

Station Timer settings.

4. Select the desired values. See descriptions below.

5. Get Default will set all data to the factory defaults

6. Click Submit

IELD DESCRIPTION

01 Emergency

Ringdown

Enable an Emergency Ringdown Number.

Possible values:Enable or Disable (default = Disable)

02 Emergency

Ringdown Timer

Enter the length of off-hook time that will cause a DN to originate an Emergency.

Possible values:0~60 (default = 0)

Note For DKT, IP, and IPT stations, do not set the time to more than 30 seconds.

03 Emergency

Ringdown

Destination

Enter the destination DN for the Emergency Ringdown.

Possible values:Up to 5 digits (default = no value)