Trunks
ISDN
6-26 Strata CIX Programming Vol.1 12/09
ISDN
The following program enables set up for ISDN-related system settings.
317 ISDN BRI Trunk
Prerequisite Program: 100 page 4-1
This command assigns ISDN BRI Trunks.
1. Select > Trunk > ISDN BRI.
2. Enter Channel Group number or click one of the following buttons:
• List – choose from a list of programmed trunks on the right side of the screen.
• Create – Assign a new trunk with default settings.
• Copy – Enter a Channel Group number and click Copy to make a new trunk assignment with
settings copied from the Channel Group you entered.
• Delete – Delete a trunk.
• Get Default - restores data to factory defaults.
3. Enter data.
4. Click Submit.
F
IELD DESCRIPTION
Channel Group Enter the BRI channel Group Number.
Possible values:1~32 (CIX40), 1~32 (CTX100), 1~48 (CTX670 Basic & CIX200),
1~128 (CTX670 Exp), 1~48 (CIX1200 HCTU only), 1-128
(CIX1200 HCTU+HEXAU), 1~220 (CIX1200 HCTU +HEXBU)
(default = 0)
To Next Page
Loading...