Operation
Alarm Control
10-18 Strata CIX Programming Vol.1 12/09
Alarm Control for Slot (Program 920)
Select Alarm/Traffic > Alarm Setup > Alarm Slot.
Prerequisite Program: None
This program resets all alarms and enables/disables the Current Alarm Summary notification.
F
IELD DESCRIPTION
00 Equipment
Number
Enter the cabinet and slot number of the equipment to be monitored.
Notes
• If you want to monitor expansion cabinet power, you must set the
appropriate cabinet number (02~07) and slot number to “00.”
01 Alarm Enable/
Disable
Set this parameter to enable to monitor the selected equipment. Set this
parameter to disable to not monitor the selected equipment.
Possible values:Enable/Disable.
Alarm Occurs
Current Alarm Summary
10 minutes 10 minutes
Enable/Disable in Prog 920 Enable/Disable in Prog 919
To Next Page
Loading...