Strata CIX 100 - Remote Node Ipu Ip Address Assignment

IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09 8-29
IP Telephone
Programming
674 Remote Node IPU IP Address Assignment
Note Release 5.00 MR14 and later only.
Prerequisite Program: none
This command assigns a node ID to an MIPU/GIPU/LIPU IP Address. This is used by the IP Mobility
feature to identify the home MIPU/GIPU/LIPU IP Address of a DN.
1. Select Strata Net > Remote Node IPU Address.
2. Enter the Remote Node ID.
3. Enter the IP Address of the MIPU/GIPU/LIPU in that remote node.
4. Click Add.
5. To Remove or Modify a node, double-click the Node ID.
54 Simple System
SpeedDial
Whether or not to system speed dial supplement is allowed.
Possible values:Enabled or Disabled (Default)
55 SIP Inband Mode Whether or not SIP extensions can transmit DTMF to a trunk while ringing the called
party.
Possible values:Enabled or Disabled (Default)
F
IELD DESCRIPTION
00 Remote Node ID The Node ID of the CIX system to connect to over Strata Net.
01 Remote Node IPU IP Address IP Address of the MIPU/GIPU/LIPU in the remote node.
F
IELD DESCRIPTION