Station
Assignment
5-32 Strata CIX Programming Vol.1 12/09
Hunt Group Table View
Hunt Group Table View enables you to view all hunt groups and its members.
To access the Hunt Group Table View
Select Station > Hunt Group Table View.
See Table Views in Chapter 2 for table functionality.
Note This table has more functions in addition to the regular functionality found in other table views.
The Navigation Bar has the following additional buttons:
• Delete – Click on a row to delete any directory number from a Hunt Group then click the Delete button.
When the Delete button is active the Add button and the Delete Group button will not be active. To
unselect a row that is selected (in yellow), click the row again.
• Add – To add directory numbers to a hunt group select the Hunt Group in the table view from the
Navigation drop down in the Navigation bar, then click the Add button.
If no rows are selected, the Add button is active. Click the Add button to add members to Hunt Groups.
When you click the Add button the Add dialog box displays.
Select the DN from the Available Directory Numbers box, then click the Arrow button in the center. This
moves the DN to Hunt Group box on the left. Click Add Now to Save the entry or Cancel to cancel.
Clicking Add Now automatically refreshes the table view.
In the dialog box, if you want 6200 to appear before 5200, click 6200 on the right, then click 5200 on the
left and then click the arrow in the center.
• Select All and Unselect All – Clicking these buttons selects or unselects all groups in a table.
To Next Page
Loading...