Strata CIX 100 - 400 Emergency Call Destination Assignment

To Next Page

To Previous Page

Attendant

Strata CIX Programming Vol.1 12/09 7-3

Attendant

400 Emergency Call Destination Assignment

Prerequisite Program: None

This command assigns Emergency Call destinations to Emergency Call groups. There is one group for

each Day mode (Day1, Day2 and Night).

1. Select Station > Emergency Call.

2. Enter Program 400 data or click one of the following buttons:

• Insert – assigns the destination for the selected index.

• Modify – assigns a new destination to the selected index.

• Remove – removes the assigned destination from the table.

• Get Default - sets all data to factory defaults.

3. Click Submit.

IELD DESCRIPTION

01 Day/Night Mode Select the time of day mode (Day1,Day2,Night) from the table below.

Possible values:Day1, Day2, Night (default = no value)

02 Called Number Index Emergency call group number (1~4). The system will hunt through

these in numerical order to find an available emergency destination.

Possible values:1~4 (default = no value)

03 Emergency Call

Destination

Enter the DN, pilot number or private number to be associated with the

called number index.

Possible values:Up to 32 ASCII characters (default = no value)

04 Action Choose whether you are replacing an existing emergency number

index or inserting one in the list. if inserting, the new entry will assume

the specified index. The remaining indexes will be increased by one

and the last one, 4, will be deleted.

Possible values: Modify or Insert (default = Modify)