IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09 8-13
IP Telephone
Programming
161 LIPU/MIPU/GIPU Configuration
Prerequisite Program: None
This command defines the network configuration of an MIPU/LIPU/GIPU.
1. Select IP-Telephony > L/M/G IPU Configuration.
2. Select Cabinet and Card slot from list on right side, or enter a location and setup the MIPU/LIPU/GIPU
by adding values to the remaining fields.
3. Click Submit.
F
IELD DESCRIPTION
00 Cabinet & Slot
Number
Enter the cabinet and slot number of the MIPU/LIPU/GIPx to be configured.
Cabinet numbers:
• CIX/CTX100: Select 01 for Base and Expansion cabinet.
• CIX200: Select 01 for Base and 02 for Expansion cabinet.
• CIX/CTX670: Select 01 for Base and 02~07 respectively for each
Expansion cabinet.
• CIX1200: Select 01 for Base and 02~12 respectively for each
Expansion cabinet.
Slot numbers:
• CIX/CTX100: Select 01~04 for Base slots and 05~09 for Expansion
slots.
• CIX/CTX100: Virtual Slot for ACTU Relay = Cabinet 02, Slot 05.
• CIX200: Select 01~04 for either cabinet.
• CIX/CTX670: Select 01~08 for Base slots and 01~10 for Expansion
slots.
• CXI1200:Select 01~08 for Base slots and 01~10 for Expansion slots.
• CTX28 and CIX40 assignments are hard coded and cannot be
changed.
• Virtual Slot for GCTU Relay = Cabinet 02, Slot 05.
01, 01 - 8 digital telephones on motherboard (CTX28, CIX40 R1HW and R2HW).
01, 02 - 3 CO lines on motherboard (CTX28, CIX40 R1HW), 4 CO lines (CIX40
R2HW)
01, 03 - no card (CTX28, CIX40 R1HW), GVPH (CIX40 R2HW)
01, 04 - 1 (Base) or 2 (GSTU) analog station ports (CTX28, CIX40 R1HW and
R2HW)
01, 05 - GVMU (CTX28), GVPH (CIX40 R1HW), GIPx, MIPU or GCOCIH (CIX40
R2HW)
01, 06 - GIPx, MIPU16 or GCOCIH (CIX40 R1HW), no card (CTX28, CIX40
R2HW)
01, 07 - 8 digital telephones on GCDU (CTX28, CIX40 R1HW and R2HW).
01, 08 - 3 CO lines on GCDU (CTX28, CIX40 R1HW and R2HW).
To Next Page
Loading...