Services
Destination Restriction
Strata CIX Programming Vol.1 12/09 9-27
Services
534 DRL Exception Table Assignment
Prerequisite Program: 533 above
Note In CTX software R1 ~ R1.2 this table only allows 11 digits. Starting with R1.3 and up 13 digits are
allowed.
This program assigns a DRL Exception Table to an existing DRL table. If the DRL table is an allow table, its
Exception Table must be a deny table and vice versa.
111 DR Level (DRL)
Prerequisite Program: None
This program enables credit card calling for a DRL.
DRL Table View
The DRL table view enables you to view all programmed DRLs. This table is a read only table. To access
the DRL table view, select > LCR/DR > DRL Table View.
See Table Views in Chapter 2 for table functionality.
Centrex/PBX Screening Table View
The Centrex/PBX Screening Table View enables you to the Centrex/PBX Screening table.
To access the Centrex/PBX Screening Table View, select LCR/DR > OLG Screening Table View.
See Table Views in Chapter 2 for table functionality.
F
IELD DESCRIPTION
00 Destination
Restriction Level
(DRL)
Enter the DRL for which you want to populate an exception table.
Possible values:1~16 (default = no value)
01 Exception Dial String Add the dial string you wish to be treated as an exception.
Possible values: 1~ 7 digits may include wild cards “X” and “N” where X =
0~9 and N = 2~9.(default = no value)
02 Add/Delete Add or delete the string entered in 01 DR exception table above to the DR
exception table.
Possible values:Add or Delete (default)
F
IELD DESCRIPTION
00 Destination
Restriction Level
(DRL)
Enter the DRL number.
Possible values:1~16 (default = no value)
01 Credit Card Calling Enable Credit Card Calling for this DRL.
Possible values:Enable or Disable (default)
To Next Page