Strata CIX 100 - Page 207

Station
Assignment
Strata CIX Programming Vol.1 12/09 5-3
Station
03 LAN Interface Number Enter “1” for an LIPU, GIPx or MIPU, enter “2” for an LIPS.
Possible values:1 (Default) or 2
05 COS Day1 Class of Service for Day1 mode.
Possible values:1~ 32 (default = 1)
• Day2 Class of Service for Day 2 mode.
Possible values:1 ~ 32
•
Night Class of Service for Night mode.
Possible values:1 ~ 32 (default = 1)
06 DRL Day1 Destination Restriction Level for Day1 Mode (used for credit card calling).
Possible values:1 ~ 16 (default = 1)
• Day 2 Destination Restriction Level for Day2 Mode.
Possible values:1 ~ 16 (default = 1)
•
Night Destination Restriction Level for Night Mode.
Possible values:1 ~ 16 (default = 1)
07 FRL Day1 Facilities Restriction Level for Day 1 Mode.
Possible values:1 ~ 16 (default = 1)
• Day 2 Facilities Restriction Level for Day 2 Mode.
Possible values:1 ~ 16 (default = 1)
•
Night Facilities Restriction Level for Night Mode.
Possible values:1 ~ 16 (default = 1)
08 LCR Group Least Cost Routing Group Number.
Possible values:1 ~ 16 (default = 1)
09 QPL Day1 Queuing Priority Level for Day 1 Mode.
Possible values:1 ~ 16 (default = 1)
• Day 2 Queuing Priority Level for Day 2 Mode.
Possible values:1 ~ 16 (default = 1)
• Night Queuing Priority Level for Night Mode.
Possible values:1 ~ 16 (default = 1)
10 Name to Display Enter the name that should be displayed on telephone LCDs for this PDN.
Possible values:16 ASCII Characters (default = no data)
11 Dialing Progress Tone Type of Tone to hear after dialing LCR access code.
Possible values:Dial Tone (Default), Entry Tone or Silence
Table 5-1 Station Assignment Data for IP, and SIP Telephones (Prog 260) (continued)