Station
Assignment
Strata CIX Programming Vol.1 12/09 5-43
Station
03 ISDN Protocol Select the ISDN protocol. Only Bearer capabilities specified by the protocol can be
entered in this field. The Initial value for ISDN Protocol corresponds to information
set in the hardware level.
Possible values:Nat’l ISDN (default), ETSI, TTC or Nat’l ISDN Nortel
Note National ISDN = North America, ETSI = England and TTC = Japan.
04 Type Connection Select Point to Point or Point to Multi-point connection type.
Possible values:Point to Point (default) or Point to Multi-point
05 COS
• Day1 COS
• Day2 COS
• Night COS
Select the BRI Station Class of Service assignments.
Possible values:1~32 (default = 1)
06 DRL
• Day1 DRL
• Day2 DRL
• Night DRL
Select the BRI Station Destination Restriction Level assignments.
Possible values:1~16 (default = 1)
07 FRL
• Day1 FRL
• Day2 FRL
• Night FRL
Select the BRI Station Facilities Restriction Level assignments.
Possible values:1~16 (default = 1)
08 LCR Group Select the Least Cost Routing Group number to which this BRI Station belongs.
Possible values: 1~16 (default = 1)
09 QPL
• Day1 QPL
• Day2 QPL
• Night QPL
Select the BRI Station QPL assignments.
Possible values:1~16 (default = 1)
10 Speech Capability Bearer Capability Speech See Table 5-6 on page 46.
Possible values:Enable or Disable (default = Enable)
11 3.1KHz Audio Bearer Capability 3.1kHzAudio See Table 5-6 on page 46.
Possible values:Enable or Disable (default = Enable)
12 7KHz Audio Bearer Capability 7kHzAudio. See Table 5-6 on page 46.
Possible values:Enable or Disable (default = Disable)
13 64Kbps Unrestricted Bearer Capability unrestricted digital information 64kbps. See Table 5-6 on page
46.
Possible values:Enable or Disable (default = Enable)
14 56Kbps Unrestricted Bearer Capability unrestricted digital information 56kbps
15 2x64Kbps
Unrestricted
Bearer Capability unrestricted digital information 2x64kbps
F
IELD DESCRIPTION
To Next Page
Loading...