Strata CIX 100 - Page 30

Strata CIX Programming Guidelines
Use Default Auto-programming to Start Up
1-10 Strata CIX Programming Vol.1 12/09
Table 1-17 Program 204 Default Data
In Program 204, all telephones are programmed as 20 buttons.
Table 1-18 Program 102 New Default Data
Feature Code Default Value Function
870 #963 Call monitor log off
Table 1-19 Program 205/213/215 New Default Data
Feature Code Function
870 Call monitor feature button
Table 1-20 Program 313 Default Data
Caller ID Prog 313 Function
field 1 Caller ID receive method nothing/ANI-MCI/ANI-Sprint/CLASS
field 2
Caller ID identification notice
contents
ANI and DNIS
/DNIS/DID
Underlined entry is CIX100 and CIX200 default
Table 1-21 Program 100 Default Data
Virtual Slot
Equip.
Nos. *
Circuits
PCB
Code
Station Line
Numbers
Connection
0101 8 - Digital telephones (no spkr OCA) 017 200~207
GMAU1A
(motherboard)
0102 3 - CO lines, with CLID 028 CO1~CO3
0103 Not used
0104 Standard telephone 01~02 026
01~208
02~217
01-GMAU1A
02-GSTU1A
0105 4 - Voice mail ports 026 220~223 GVMU1A
0106 Not used
0107 8 - Digital telephones 017 209~216
GCDU1A
0108 3 - CO lines with CLID 028 CO4~CO6
0205 Virtual BIOU 020
Relay Contact
Page, MOH
GCTU1A
*Slot codes are set during system initialization and cannot be changed.