Operation
System Setup
10-4 Strata CIX Programming Vol.1 12/09
Set Time and Date
Prerequisite Program: None
This program enables you to change the system clock in Strata CIX.
Select System > Date and Time
121 Automatic Day Light Savings Time Change
Prerequisite Program: None
This program enables the CIX to automatically change the system clock according to local day light
savings time (DST) changes.
Select System > Daylight Saving
F
IELD DESCRIPTION
Date Set Strata CIX current date or select it from the date picker at right.
• Select current date (YYYYMMDD).
Possible values:YYYY = Year, MM = Month and DD = Day
• Current day of week will display once the year, month and day parameters
have been entered.
Possible values:Sunday ~ Saturday (Read only) (default = no value).
• Leap year will display based on the year entered.
Possible values:Leap, Leap Next x, where x = 1, 2 or 3. X. is the number of
years since the previous leap year (read only) (default = no
value).
Time Set Strata CIXs current time (hhmmss).
Possible values:hh = hour, mm = minutes and ss = seconds (default = no
value).
F
IELD DESCRIPTION
Enable Automatic
Day Light Savings
Time Change
This field is not set by default. This field must be set to allow automatic DST
change.
Change Based On
Month, Week and Day
of the Week
The method used to set the day and time of day the DST change occurs.
Possible values:Day of week (recommended) set the day, the week and the
time for the change. For example: Sunday, The first week of
April at 2AM
Date (not recommended in the USA) The the date and time
for the change. Example Oct. 31, 2:00 AM
Begin Daylight
Saving Time
Default is Sunday, first week of April, 2:00 am
End Daylight Saving
Time
Default is Sunday, last week of October, 2:00 am
To Next Page