Operation
System Setup
10-10 Strata CIX Programming Vol.1 12/09
916 IP Configuration
Prerequisite Program: None
This program displays Network Communication IP address configuration. This program applies to the
Strata CIX Network (NIC) jack connection only. It does not apply to the CIX maintenance modem. To
change TCP/IP settings see “CIX Processor NIC Interface TCP/IP Auto-programming” on page 1-9.
1. Select Maintenance > CIX Processor IP Address.
2. The following Strata CIX default address displays:
• IP Address – a.b.c.d
where a.b.c.d = 0~255. This IP address is for the NIC/Ethernet only.
• Subnet Mask – e.f.g.h
where e.f.g.h = 0~255 (default = 255.255.255.0). Octet “h” in SubNet Mask cannot be the same as
octet “d” in the IP address.
• Default Gateway (default = 0.0.0.0).
To Next Page
Loading...