Svantek SVAN 979 - Page 228

228
SVAN 979 User Manual - Appendixes
Group name
#1
code
#7
code
#S
code
Code value description
GPS position (read only)
GP
Get position of the instrument from the GPS
module.
Response format:
#7,GP,qq,YY,MM,DD,hh,mm,ss,LaD,LaM,LaS,
LaS10,Ladir,LoD,LoM,LoS,LoS10,Lodir;
where:
qq – Fix (qq>0), Not fix (qq=0),
YY – Year,
MM – month,
DD – day,
hh – hour,
mm – minute,
ss – seconds,
LaD – Latitude degree,
LaM – Latitude minutes,
LaS – Latitude seconds,
LaS10 – Latitude fraction of seconds,
Ladir – Latitude direction (N- north, S-
south),
LoD – Longitude degree,
LoM – Longitude minutes,
LoS – Longitude seconds,
LoS10 – Longitude fraction of seconds,
Lodir – Longitude direction (E- east, W-
west),
Start the measurement
without data recording
ST
#7,ST; This function start the measurement
without logging and wave recording.
Time from last GPS
synchronization
GL
#7,GL; This function returns the time from last
GPS synchronization.
Battery voltage
BV
#7,BV; This function returns the battery voltage.
USB voltage
UV
#7,UV; This function returns the USB voltage.
External voltage
EV
#7,EV; This function returns the external voltage.
Marker definition
CM
#7,CM,<no>,"<name>",<event>,<point>;
where:
<no> – marker number ,
“<name>” – marker name,
<event> – 0 (Off) or 1 (On),
<point> – 0 (Off) or 1 (On),
Marker status
MR
#7,MR,<no>,<state>;
where:
<no> – marker number ,
<state> – marker status,
Unit Name
UN
#7,UN,<name>;
Display the Unit Name on
the screen
DN
#7,DN,<time>,<color>;