“VelMF” filter is used for evaluation of the state of machines. This filter is used for measurements in the
frequency range from 10 Hz to 1000 Hz and conforms the ISO 10816 standard.
“VelMF” filter characteristics
C.4.2.3 Digital filters implemented in vibration modes for displacement measurements
“Dil1” filter is used for displacement measurements (vibration signal) in the frequency range 1 Hz - 20 kHz.
“Dil1” filter characteristics
“Dil3” filter is used for displacement measurements (vibration signal) in the frequency range 3.5 Hz - 20 kHz.
“Dil3” filter characteristics
To Next Page
