41
4. OPERATING THE CALIBRATOR
The T703/T703U calibrator is a computer-controlled calibrator with a dynamic
menu interface for easy, yet powerful and flexible operation. All major
operations are controlled from the front panel touch screen control.
To assist in navigating the system‟s software, a series of menu trees can be found
in Appendix A of this manual.
NOTE
The menu flowcharts in this manual depict the manner in which the front panel touchscreen is
used to operate the T703/T703U Photometric Calibrator. Please refer to Figure 3-3 for an
illustration of how the menu flowcharts correlate to the actual front panel.
The menu flowcharts depict typical representations of the display during the various operations
being described; they are not intended to be exact and may differ slightly from the actual display
of your system.
NOTE
When editing values in the software, the ENTR button may disappear if you select a value that is
invalid or out of the allowable range for that parameter (e.g. such as trying to set the 24-hour clock
to 25:00:00). Once you adjust the setting to an allowable value, the ENTR button will re-appear.
To Next Page
Loading...