Tonghui TH2829 Series - Page 137

TH2829X Series Operation Manual Chapter 7 Transformer Auto Scanning Test
128
1) Select and set all control and setup parameters on specific page.
2) Press the soft key File Manage, the following soft keys will be
displayed.
 LOAD
 STORE
 DELETE
 COPEY E:
 FIND
 EXT. FILE
3) In file list, move the cursor to the location where the file will be
saved. Another method is to input the file name directly.
4) Press the STORE soft key, the following soft keys will be
displayed.
 Yes
 No
5) If No is selected, the save operation will be cancelled and return
to Step 2).
6) If Yes is selected, the bottom line will display: Input the file
name:
7) User numeric keys to input the current file name and press
[ENTER] to confirm. TH2829X will save the current control and
setup data with the input file name.
8) Press Exit to return to the current display page.
TH2829x771
C. Load a file
1) Press the soft key File Manage, the following soft keys will be
displayed.
It is the default file name and can be modified or
directly changed.