Tonghui TH2829 Series - Operation Steps for File Management

TH2829X Series Operation Manual Chapter 4 [SYSTEM] and [FILE]
59
operation system)
4.2.3 Operation steps for file management
A. Search an existed file
1) Roll the knob to view one by one.
2) Use the [←] and [→] to view one page by one page.
3) Press the soft key FIND. Input the file name and then press the [ENTER]
to search the target file.
B. Save the following control and setting parameters to a file by the
following steps
1) Select and set all control and setting parameters on the desired page.
2) Move the cursor to FILE MANAGE, the following soft keys will be displayed.
 LOAD
 SAVE
 DEL
 COPY TO E:
 FIND
 EXT
3) In the file list, move the cursor to the file-saved position or input the file
number directly.
4) Press SAVE, the following soft keys will be displayed.
 Yes
 No
5) Press No to cancel the current save operation and return step 2.
6) Press Yes, and “☺：Input LCR file name：” will displayed
7) Use numeric keys to input the current file name and press [ENTER]. Then
TH2829X will save the control and setting parameters as a file in this name.
C. Load the control and setting parameters from a file by the following
steps
1) Press File Manage, the file list and the following soft keys will be displayed.
 LOAD
 SAVE
 DEL
 COPY to E:
 FIND
 EXT
2) In the file list, move the cursor to the file-saved position or input the file
number directly.
3) Press LOAD, the following soft keys will be displayed.
 Yes
 No
4) Press No to cancel the current load operation and return step 1.